HH400 - How to support US English keyboard country layout? Does the HH400 support USB COM Port Emulation? HH400 - what kits are available? HH400 - what Software utilities / driver are available? HH400 - what certification(s) are available?
The HH is Honeywell low entry Imager Scanner with limited support!
The HH400 does support a LED Aimer, and is supporting the most known 1D / 2D (disabled by default) / PDF symbologies! No OCR and / or PlugIn support. The HH400 is a corded scanner and does support the RS232 ((Default: 115200 baud, 8,1,N!) The RS232 interface parameters cannot be changed at current stage, this will be added later). USB Keyboard Emulation and USB COM Port Emulation is as well supported, since the release of the standard firmware level DJ000036BAK! No other interfaces are supported! For the USB COM Port Interface and the dedicated USB COM Port driver see Knowledge Base Article 000057369! Using the latest available firmware level, the HH400 is supporting Chinese Keyboard Country layout, US and many more. For a full list please contact Technical Support! and / or see the Knowledge Base Article 000057380! Also Presentation Mode was implemented using DJ000036BAK and any higher firmware level. The typical read range for a 13 mil UPC-A / EAN13 bar code is 40mm - 250mm. The minimum resolution for 1D Code 39 is 4 mil. The HH400 is not supporting any kind of presentation mode, therefore there are no figures available for 'Motion Tolerance and / or Scan Rate'! Trigger Mode only. The HH400 is tested for an IP40 rating and an Operating Temperature of 0°C 0 50°C. There are no certificates available except for RoHS Compliance. The HH400 is LED / Laser Safety EMI CLass A. The USB interface is not USB - and the USB COM Port driver is not WHQL certified! The USB Vendor ID (VID) is: VID:0x23D0 (It is a Honeywell brand product). The USB Product ID (PID) is: PID:0C80~0C9F (USB OID range is new from other YouJie products). Except CR and LF suffix, no other prefix/suffix supported. No data formatting supported. No min/max symbology length supported. No symbology length lock supported. No PC Side Debug Tools, software utilities, Firmware update utility and / or driver available!
Following cables are available:
USB: 1.5m CBL-500-150-S00-02
RS232: 1.5m CBL-020-150-S00
Following kits are available:
HH400-1-1RS232 KIT, BLACK, 1.5M RS232, PSU
HH400-1-1USB KIT, BLACK, 1.5M,USB
HH400-1-1USB-Ali KIT, BLACK, 1.5M,USB, Ali-pay logo