How to connect the Granit 1280i / 1980i to LXE VMT's. How to connect the Granit 1280i / 1980i to Intermec VMT's. Can the Granit be connected to Honeywell Vehicle Mount Terminals? What cable do I use to connect my Granit 1280iFR /1980i. How to connect a Granit 1980i to a VM3. Scanned data not showing.
The Granit 1280i and Granit 1980i are True RS232 only and can be connected to most Vehicle Mount Terminals (VMT's) with a standard male serial port with cable CBL-020-300-C00, or when a more rugged cable is required and/or in cold storage environments, the Industrial variant CBL-020-300-C00-01.
The 1280i default serial settings are 9600,N,8,1 which is typical for most VMT's.
The 1980i default serial settings are 115200,N,8,1 which is typical for most VMT's.
Many VMT serial ports provide +5 volt on pin 9, and with above mentioned cables, those VMT's will power the scanner. Where there is no power on pin 9 an additional power source should be connected to the power link on the cable.
Some VMT's may require addition scanner configuration. Refer to individual VMT User Documentation for details.