Using the User Guide how can you setup the SR61B or SR61T to transmit only 1 return after each scan? SD62 - How to remove the postamble after each scan?
Scanning Hardware: SR61B , SR61T SG20T
By default the SR61 scanners are configured to terminate scanned data with a carriage return(CR) and a line feed(LF). This produces a double enter to be seen by applications. To get only 1 enter the postamble has to be configured for carriage return only. In the Users Guide in chapter 4 there is a section for configuring the postamble. In this section there are configuration barcodes to setup the postamble. Here are the codes from the Users Guide:
Configuring the Postamble The default postamble is <CR> <LF>. For certain applications or when using the scanner as an HID Bluetooth device may require changing this setting. Use the following configuration bar codes to change the default postamble in the scanner.