What are the available accessories for Granit? Is part number STND-30R00-011-4 for Granit? Does the Granit support the in/out off stand feature like the Xenon? Does the Granit have a magnet switch built in to enable in/out of stand manual/presentation triggering? What stands are available for the Granit? What is a VMHOLDERK, and what does it look like? Is there a separate battery charger available from Honeywell? What are the measurements on the HOLDER-010-U? Is there a Belt holster, Vehicle mount, stand, tool balancer available for my Granit scanner?
The Granit Accessory document provides an overview of the various accessories, STND-30R00-011-4, STND-33F00-012-4, BAT-SCN01, PS-05-100W-x, HOLDER-010-U, TOOLBAL, HOLSTER-INDUSTRIAK, VMHOLDERK. The VMHOLDERK is no longer available for some Granit products, due to a less ideal form fitting. For some accessories the following additional information is available.
Cables: Besides the standard HSM cable offering the following industrial cables, which last longer in industrial environments, are available as option. Industrial cables withstand 75lbs. shock pulls, 60lbs. constant cable pull force and over 300.000 90° bends, at temperatures as low as -30 °C.
CBL-500-300-S00-01 - USB Type A, black, 3m (9,8') straight, 5V host power, Industrial grade.
CBL-500-300-S00-03 - USB Type A, black, 3m (9,8') straight, 5V host power, Industrial grade with Ferrite for 1980i.
Stands / Holders: With regards to the stands the following needs to be taken into account. The Granit does not have the circuitry to support the in/out of stand functionality like the Xenon, which is not typically required on industrial devices. For the Granit there is a
cradle type of stand available with PN# STND-30R00-011-4, description; Stand: gray, 30cm (12") height, rigid rod, weighted base, Granit cradle.
cup-type of stand available with PN# STND-33F00-012-4, description; Stand: gray, 33cm (13") height, flexible rod, weighted base, Granit cup.
There is also a Holder based on the same cup for either desktop or wall mount.HOLDER-010-U.
Power / Charging:
To charge batteries outside the scanner a four bay charger with PN# MB4-BAT-SCN01W0 is available.(has a universal power supply).
Granit 1280iFR, 1910i and 1980i are using the standard power supply 46-00xxx- This PSU is to connect to the 'power link' connector in a cable, when working with standard NON powered RS232 ports. (For xxx use: 525 = US, 526 = EU, 870 = UK, 529 = China, 528 = Australia, 871 = Australia / Denmark).
ForGranit 1911i and 1981i, the Charge and Communication Base (CCB) can, when the interface doesn't provide (sufficient) power, be external powered with PS-05-1000W-x. (For x use: A=US, C=EU, G=UK and I=China). For the Charge-only Base (CB) this same PSU is essential.